Restart Mode: Next Cue | No wrap around when OffCue has fade time

  • Just curious if anyone else is experiencing this:


    Created a 4 Cue Sequence for manually bumping intensities.


    Each cue has a .1s fade time, Trigger Type = Go

    Handle assignment = Temp (Exec 101)

    Wrap Around = Enabled

    Restart Mode = Next Cue


    When the OffCue Fade Time = 0s, the Sequence advances with each button press and wraps around back to cue 1 without issue.


    However, when OffCue Fade Time = .1s, the Sequence advances until Cue 4 and does not wrap around.


    I was getting around this by using "load next sequence "Label" in the OffCue CMD line, but that trick seems to no longer work in 1.3.1.3.


    Thoughts?

  • Just found another issue related to having OffCue Fade times:


    Created a 6 Cue Sequence.


    Each cue has a .5s fade time, Trigger Type = Go

    Handle assignment = Go+ or Toggle (Exec 102)

    Restart Mode = Current Cue


    When the OffCue Fade time = 0s, the Sequence will restart in the current cue as expected.


    However, when OffCue Fade time = .5s, the Sequence will restart at cue 5 always...regardless of which cue the sequence was turned off in, oddly.