# Change Speed in a Cue

• Hi

I want to change the Speed of my Speedmaster 1 to 95 BPM in a cue.

I use the CMD of this cue: "Master 3.1 at 95". But then the Speedmaster shows me 240 BPM instead of 95 BPM. What's the correct syntax to set the Speedmaster at XY BMP?

• Setting the Master using Master 3.1 at 95 effectively places the master fader at 95%.

At first I thought the calculation was easy but then I realized it was non linear.

So:

100 = 240

50 = 240 / 4 = 60

25 = 240 / 16 = 15

12.5 = 240/64 = ~3.75

...

So in other works I have no idea, but there should be some way to set the BMP directly but if you type list Master 3.1 it seems to only store the fader value between 0 and 100

• I believe currently a workaround is needed to set a speedmaster to a specific bpm value via commandline.

Assuming you have upgraded to the newly released v1.2, this could be a plausible solution:

1: Paste the following into commandline or create a macro, and execute once

Lua "for i=0,240 do SetVar(GlobalVars(),'bpm'..i,math.sqrt(i/240)*100) end"

2: Use the following syntax whenever you need to set a bpm-value:

Master 3.1 At \$bpm95

---

If you want to remove the variables that maps bpm to percentage values,

paste the following into commandline or create a macro, and execute once

Lua "for i=0,240 do DelVar(GlobalVars(),'bpm'..i) end"

• math.sqrt(i/240)*100)

Ahh, for some reason I was trying to raise it to the power of 2, no wonder it didn't work apparently I don't remember my grade 8 maths.