2portnode2K Grandma3 - Status locked Standalone

BECOME PART OF THE COMMUNITY - Sign up here
  • Hello, HELP ||||||

    I have a problem with my 2portnode2k on grandma3 on pc (Mac book pro).

    The names Ok, the address iP Ok (laptop 169.254.75.228 / 2portnode 2k 169.254.10.224), locations Local.

    But

    • the status of the laptop is IdeMaster and that of the 2portnode2K is Standalone,
    • Prio laptop normal / prio 2portnode2K Never,
    • Enable YES,
    • Session index laptop 0 / 2portnode2K None,
    • Session slot laptop 31 / 2portnode2K None,
    • Same version 1.1.3.2,
    • same prefix.
    • Laptop is green, 2portnode2K is gray.
    • How can I change the status of 2portnode2K.


    • HELP, =O=O=O
    • thank you very much.
    • STEPHAN.
  • Where did You get theese IP-Adresse from? Normally these in 169.x.x.x are there, when there is no IP-Adress configured or no DHCP in the Network. Did You try manually with 192.x.x.x IP-Adresses?

    And don't forget the correct Subnet in 192-Networks must be: 255.255.255.0.

    So e.g. 192.168.200.1 ist Your Mac and the Node ist 192.168.200.2. Maybe that solves Your problem 'automatically'...

    And remember: The first three 'digitparts' (i don't know how i translate that form German in correct technical english) must be the same in 192-Networks! If you're working in ArtNet-IPs, then you can use 2.x.x.x and the SubNet-Mask is 255.0.0.0 what means only the first digit has to be the same on all adresses. So 2.0.0.1 and 2.1.2.3 will work together.

    Soryy, i'm not very familiar in MA2/3 at present. I'm still learning (i worked with Chamsys). But i know a lot about networking...

    RUN DMX! With my MA3-Wing, Vizkey, and 2K onPC-Node. :)

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!