Which models of external monitors are recommended for dot 2.
Information on external monitors is located in the tech bulletin here:
http://www.lightpower-files.de/Assets/Technical bulletin_external touch screen for dot2_D2.pdf
I think just about any touch screen monitor will do. I'm using a off brand and it works fine with my setup. It's a full HD (1920 x 1080) DVI-D which I believe is what the dot2 is set for. Just make sure that your monitor is connected, when you boot your dot2.
It does not work with ELO touch screen model ET1523L
MA Lighting always recommends ELO touch screens, as ELO seems to have become a standard for touch screens.
According to ACT Lighting: "Currently, we only advise the use of this touch monitor, as it's the only one we've tested so far: ELO 2200L Intellitouch technology -- Part# E432721"
But I would think the ET1523L will work as well.
Elo has different touch technologies for the same range of types. Please make sure it is iTouch (Intellitouch).
ELO touch screen model ET1523L - 100% does not work from the dot2 (((
Thank you all for your reply.
I'm using a Dell touch screen. Works great. Lightweight, and has DVI, and HDMI inputs. Great when you need to see a video signal at the console.
Dell Model S2240T