Invert Fixture only 3D

  • Hey Guys,


    is it possible to Invert Pan/Tilt in 3D only?


    Greets Tom


    EDIT:

    Live Patch

    Fixture Attributes

    Change Pan/Tilt Values (Physical From / To) from Negative to Positve and from Positive to Negative

    Hardware:


    - GMA3 Command Wing


    - HP ProDesk 405 G4 Desktop-Mini 7PG72EA

    AMD Ryzen™ 5 2400GE (4x 3,80GHz)

    8 GB DDR4 2666 MHz

    AMD Radeon RX Vega 11

     

    - HannsG HT225 Touchmonitor


    :thumbsup:

    Edited 2 times, last by Steve_Mutter ().

  • In the patch window there are 4 columns, Pan/Tilt DMX Invert and Pan/Tilt Enc Invert (Encoder Invert).


    The Encoder Invert swaps the direction of the encoder in the 3D view. in normal clockwise moves the value up. While invert, clockwise moves the value down.


    One important thing to take note is that the values still do the same thing regardless of what mode you are in, it's just the direction of the encoder turns that gets inverted. So for example if the a value of 100 causes the lights to move downstage if the encoder is inverted or not a value of 100 will always move down stage.