• Hey,


    wanna do something like this:


    Sequence with more than one cue

    Cue 1 = Color Bump White

    Cue 2 = Color Bump Red


    The Button should work as Flash


    How to load the next cue without "go" the cue


    tried something like load sequence X cue 2

    But when Iam using the Flash Button Cue 1 is "Go"


    Any Ideas how to do something like that?

    Hardware:


    - GMA3 Command Wing


    - HP ProDesk 405 G4 Desktop-Mini 7PG72EA

    AMD Ryzen™ 5 2400GE (4x 3,80GHz)

    8 GB DDR4 2666 MHz

    AMD Radeon RX Vega 11

     

    - HannsG HT225 Touchmonitor


    :thumbsup:

  • I tried this:


    Sequence as described

    Button as Temp

    'Restart first cue' OFF


    Load cue 2, hit button


    This seems to work... one time....then back to cue 1

    Funny thing is if I add one cue and load that (3) it will always go back to cue 2..


    Seems to me something is wrong with 'Restart first cue = OFF'

    I assumed OFF meant 'Restart current cue'


    Manual is not up to date and only describes 'Restart first Step' which is not there.