Assign Rotary knob.

  • since MA+ NEXT = next step. MA + PREV = previous

    and the rotary knob is so close to those keys.

    I am thinking to assign. ROTARY left = PREVIOUS STEP and ROTARY RIGHT = NEXT STEP


    can anyone teach me how to do this, PLEASE.


    thanks


  • in the current version, this is not so easy to do.


    The graphical user interface of v1.0.0.3 only supports predefined keywords like Go+,Go- etc to be assigned to the Encoderfunctions of the specialexecutors

  • Hi Steven,


    That's a nice idea.

    Like Andreas mentioned, it's not easy to do at the moment.

    If you think you need it to speed up your programming, you can try the following:


    Create an empty Sequence far away from your current Sequences (for example Sequence 1001) with two cues.

    In the CMD section of the first cue, type:

    Next Step; Off Sequence 1001

    In the CMD section of the second cue, type:

    Previous Step; Off Sequence 1001


    Then in the commandline, type:

    Assign Sequence 1001 At SpecialExec 6

    This will assign the Sequence at the right Rotary Knob.


    Then type these to assign GoFastForward & GoFastBack:

    Edit SpecialExec 6 Property "EncoderRight"

    In the pop-up, choose >>>

    Edit SpecialExec 6 Property "EncoderLeft"

    In the pop-up, choose <<<


    You can then use the same Rotary Knob to create/browse through the Steps.


    Hope that's helpful.

  • Rotary Knob select Cue Function

    Command for previous Step:

    Load -1


    Command for next Step:

    Load +1


    Space between Load and - or + is important.


    This works only with the console or the onPC Command Wing.

    It does not work without hardware !


    Description:

    1. You need to store some cue´s in a cuelist on an executor.

    2. Press Assign and then Press the Executor Button.

    3. Write/ Load -1 /in the EncoderLeftCmd Window and Press Enter or Please.

    4. Write/ Load +1 /in the EncoderRightCmd Window and Press Enter or Please.

    5. Assign the Encoder Key or the Fader Key as an Go+.


    Now you can rotate the Rotary Encoder and Chose the cue you want.

    Press the Go+ Button to load the cue.


    Thats all ; )

    I use it for busking.

    I hope it works for your needs.

  • It works on the onPc but only in combination with an Command Wing

    Hardware:


    - GMA3 Command Wing


    - HP ProDesk 405 G4 Desktop-Mini 7PG72EA

    AMD Ryzen™ 5 2400GE (4x 3,80GHz)

    8 GB DDR4 2666 MHz

    AMD Radeon RX Vega 11

     

    - HannsG HT225 Touchmonitor


    :thumbsup:

  • Post by Vesuv1669 ().

    This post was deleted by the author themselves: Found solution, just create another sequence ().