Move a fader to a position by makro

  • Hello together,

    how to move a fader to a position like zero?

    Following examples doesnt work:

    exec 1.201 at 0

    zero exec 1.201

    tozero exec 1.201

    off exec 1.201

    ive also tried it with exec 201 instead of 1.201

    Thank you

  • Vesuv1669

    Changed the title of the thread from “Movr fader to a position by makro” to “Move a fader to a position by makro”.
  • Use the "fader<fadertype>" keyword to set the desired level on the fadertype you want. For example, "FaderMaster Exec 201 At 0". As playback is owned by the sequence now and not the executor, you can use the same keywords directly on sequences:

    • FaderMaster Sequence 1 At 100
    • FaderTemp Sequence 1 At 50

    ...and so forth.

    Also, Exec 1.201 would be the 201st child of Exec 1. In grandMA3, x.y is always the "yth" child of object "x". Executors are children of Page objects, so if you want to specify exec 201 on page 1, you would either say "Page 1 Exec 201" or simplify with "Page 1.201".

  • When you use the executor object as target, currently any Fader* command will use the function actually assigned to the executor handle.

    If you need to apply a specific function, rather the one assigned to the executor-handle, you will have to target the sequence directly as in Ryans example

    In a future version we will hopefully be able to target specific function also indirectly via the executor, along with a dedicated keyword merely to target whatever function is assigned to the executorhandle.

    In the current version, you can use the Exec Time master to set fadetime for these actions.