Problem Solved. Please delete post...
Posts by TheRazz
BECOME PART OF THE COMMUNITY - Sign up here
-
-
Hi, what do you mean ?
My solution was that you use separate effects in the pool and not put them together in the phaser because if you use, for example, the speed master, you can control the effect better.
-
Display More
Hi Rasmus and Clintos,
Let me clarify myself, i have 6 main sequences that are on my executors on page 2. The sequences you see on the image are bumps which can be any parameter. those are programmed with the use of recipes. This part is completely fine in v1.9. The problem occurs when i assign the bump at the bump_replace. When assigning a sequ to the bump_replace, the filter and playbackmasters go to none. The strange part is that i assigned a filter and a playbackmaster to the sequence that i mirror from.
Clintos This did not reset in V1.8.8.2 or older versions.
If it helps i can record a video of the issue.
.
I suspect that it's a problem with the filters, because whenever something doesn't work, the filter blocks it. Maybe this video help:
External Content www.youtube.comContent embedded from external sources will not be displayed without your consent.Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.a video would always better show what's wrong.
-
Hi!
It's hard to figure out what you want to do, but focus on the innovation called recipes. If it doesn't help or if you don't know how to use write again I'll try to help you!
Best wishes,
Rasmus
-
I've tried with my onPC that work separately but the selection grid need to be ordered
Thanks for hint!
-
did everything all day and came to the conclusion it's a 1.9 bug
-
-
In version 1.8, each wavelength can be defined separately by a phaser. In version 1.9 you can't select it, it automatically puts it on everyone, what am I doing wrong or how has it been updated?
-
HI
I had a similar situation once - it helped to enter the midi settings - selecting none - and re-selecting the midi in/out deviceyeah one time its worked but not anymore
-
-
If I select one show, it works properly, but the other one, it doesn't respond anymore
onPC settings are correct and in & out are correct.
Is it bug or something? i can show video if somebody wants.
-
-
-
-
No its a readout setting in the fixturesheet
Thanks man! This hint help me out. Problem is readout yeah
-
No its a readout setting in the fixturesheet
there is no more percentage selection
-
Is it bug? Pan and Tilt shows code not precent.
-
Press the Sync button twice. This resychronizes the phasers. You find it top left in the Encoder Bar.
Thanks man! Its works well.
-
Have you tried the measure layer? With that you can define how many beats does round of your phaser take.
Mesure is same. Timing is wrong.
-
How can i sync phaser time all parameters? At the moment i do playing speed to get same lvl.
I mean dots...
