Posts by Robin Jong
-
-
Hi, are u sure about step 4, they Cancel the Width parm of step 3
For me this works as described. If followed in order it is not a problem.
-
You could put step 1 at dim 100 and step 2 at dim 0.
Furthermore you can manipulate the transition and width of both steps to make a dim 0 state longer or shorter. same applies to dim 100.
So step for step:
- Step 1 dim at 100
- Step 2 dim at 0
- In step 2 set the width at 300% so you have 4 *periods* in the phaser.
- In step 2 set the width at for example 35% so the ramp down finishes on the halfway mark of the phaser.
- Lastly set the Phase from 0 thru 360 for 1 "Streak" or at 0 thru 730 for 2 "Streaks"
Of course you can alter the transition as pleased in both steps. This is just an example.
-
no, I think this is not possible. Could be a good thing to add.
-
If I undertood you corretly. Edit the layout object and change the property to Goto. You need to be on setup mode in layout view when doing this.
thanks that was the solution. Sometimes things are hidden everywhere.
-
hi there. I'm having difficulties properly using a sequence with multiple ques inside from a layoutview. The goal is when the quelist, it opens the list with a goto beforehand so going to the desired que is made easy. Someone have an idea? I've got it in a different showfile but recreating it would be a plus.
Thx in advance.
