Posts by mate1213

Hello!

I hope it's not too late for this topic. As far as I know There is no way to get out midi control from MA3 yet. (This feature is not implemented yet, and I don't know when or even ever will be.)

I working on a solution for this (some python and LUA script). I will publish when it's done!

Best regards,

Máté

Yes, perfectly!

Thank you!

Hello!

I would to create the fixture Involight OB350 [manufacturer page with the description] .

I did created the fixtureType with the subfixtures, but those segments only have RGB values. Can I add somehow an virtual dimmer? Does it should work the same way, like a non-subfixture virtual dimmer RGB light?

Thanks for any advice!

Mate

Yeah I figured out...

Sadly my German not so great. (My knowledge close to zero.)

But, hopefully, based on example codes, I could understand most of it

Thanks!

Nice. Is there any link for registration? Is it free? Or paid webinar?

Pyroaxel

Hi,

In version 1.3.x.x there was a window which called Step Creator, but in 1.4.2.1 I can't find it.

Did they discontinued this feature?

Thanks

That's a really good news

Altho someone linked an unofficial API documentation in some other thread, and that's seems to be quite usable.

That's a great workaround for me. Thanks Ryan Kanarek!

Just from curiosity:

Is there or will be any information about the API available from official source?

I asked this from the tech support in December.

They said it's not planned yet to open for Linux. They already opened for macOS with MA3 OnPC.

Actually some point I could understand that. (Linux could be really tricky specially with the high diversity drivers.)

But I would be really pleased if they could release some version to Linux.

Thanks, for your the generous proposal!

Actually I have quit good understanding in different programming languages [C++, C#, Python, ...] (In my day job, I work as a programmer )

I just need to figure out how can I interact with the MA3 objects using LUA.

If is there any official documentation, what are these keywords, functions, objects that would be great. Because in the help page for LUA not help at all .

Hello!

I need to create a ton of macro, almost with the same content. Could I somehow automatize this with LUA script.

Or is there any other solution for this?

the content of the macro:

Copy Preset 4.[] At 4.[] /o

At Preset 4."Bars"

If its help, I would make my color phasers more flexible, for multiple groups.

Thaks for any help.

Oh okay. Then I misunderstood, sorry.

Here is couple things to start with.

https://en.wikipedia.org/wiki/Lua_(programming_language)

https://www.tutorialspoint.com/lua/index.htm

This is the official LUA documentetiaon, in this you can find every function:

https://www.lua.org/manual/5.4/

This is a brief video tutorial series for LUA programming:

Thank you!

Exactly what I'm looking for.

Hello!

I just wondering, is there any collection of the keywords in MA3 with their switches (or parameters).

I'm looking for something like in linux cmd -h or --help switch. Which gives you a brief text how the command works. Or when you hit <TAB><TAB> in the console, it lists all of your available commands.

Is there any similar in MA3?

(I know in the help window there is most of the information, just that is much more detailed, than what I'm looking for. And tot contains anything)

I really appreciate any suggestion. (Hope, I was understandable.)

Máté

Hi,

I'm just guessing now, but maybe network problem.

Is there any chance for duplicated IP addresses in your network?

The 2nd and 10th (What you mentioned), those are in the Interface list?

Or the last octets of the IP address? (In my case those are the ...1, ...78, ...100, ...40) <-- This case what is your interfaces subnet mask?

Do you trying to use this software?

Hi,

Thanks for the suggestions.

It happened with 2 different show file at 2 weekend. I didn't tried with blank show yet.

(Most of the time I prepare the show file at home in workdays on another computer, and at the weekend I just load them on the PC above.)

I checked a memory usage both in Task Manager and in the MA3 software, and It never went above 3,5-4GB (it was same at both place). So well under the critical. The CPU usage under 15% all the time. Only the GPU is a bit high (30% in default, 70% in view where is 3D window). I did't checked the video memory so far, maybe there can be the problem. (But never before experienced lagging, or frame dropping, or any graphical problem. And when this freezing happening and I click on the Windows red X button the confimation window came up, just I can't choose between Save-Exit-Cancel.)

I will check the memory share asap.

Hi,

I used a GrandMA3 onPC 2K node in the past 2 weeks, with the onPC sofware (1.3.1.3 latest), this PC and without command wing. So in most scenario this way I need to controll my playbacks thru the touch screen.

I have 3 problem:

1. In the past couple weeks I experienced sometimes the GUI of the program just freeze (all of my active playbacks and phasers still runs in the same time). I can't use my playback faders and buttons, or switch to other view, or anything (the default windows exit button working).
   This mostly happens when I'm on the playback window. And I need to restart the program to work everything correctly again.
2. The base of the situation almost the same as above. I'm in the playback window and I'm doing my show... And this time I just lost the multi touch functionality on the screen. The only thing which can fix this, is the program restart.
3. This is really similar to the previous. Just the outcome diffrent... All of my phasers stop and the program not respondig any input. I need to kill the process in task manager

These 3 above appens 2-3 times in every 1 hour an only if I'm using the playbacks.

I didn't find any noticable thing when the program freezing. (Maybe if I'm touch the edge of the playback fader, but not sure...)

I can provide my showfile if it's necessary.

I'm the onlyone, who found this bug?

Thanks for your answer.

I tried to set the TrigType to Time, this is not working that way, I would like to do, just continuously step on the next cue without waiting

(as expected if I'm not setting up the time parameter). So the BPM can't override the TrigType.

I need to dig deeper into the topic...