BECOME PART OF THE COMMUNITY - Sign up
here
-
Hi folks,
I'm searching a way to connect visualizer Capture 2019 to a grandMA3 Light version. I've tried in the second rj45 entry, same range ip, same submask but the consol didn't see my laptop.
And also thru a router, same result.
With our OnPc and a wing no problem, it works instantly.
Did I miss something ?
Gr.
-
Hi Ryan,
Yes, that's the problem !
Some answers :
- No, it isn't always the same fixture/ attributes, random results.
- Yes I have 3 sequences, with one cue at each and fixtures in the programmer ON
- Sacn from the console, to a router, going in a Hub, going to a node MA (everything in rj45) and from the node to the fixture 5-pin
- I didn't check if I have the unexpected data in the DMX sheet, but nothing in the attribute parameter.
- Yes, I have double-checked
If I discard the changes in my patch, nothing happen...
-
Hi guys,
With the last version of the GrandMA 3 (1.2.0.2) , on a MA3 light.
When I patch new fixture and save the patch, some informations are send to my fixtures already on. Usualy on the first beam parameter or on some pan parmeters
Just to report and to know if I'm the only one to have this issue
Gr.