Does MA3 on MAC support on MAC OS Sonoma?
Posts by hui123
BECOME PART OF THE COMMUNITY - Sign up here
-
-
Sebastian,
Thank you so much.
I would like to do a MACRO so that I can assign some key to 'TIME'.
Assign Property "Key" "Time"......does this work?
-
Jeffy, ur situation is the same as mine.
I prefer and like to use MAC.
I install 'touchbase' and I am using a Mac to run ma3 on PC.
but i found out 3-finger scroll dont work.
otherwise, the other gesture work.
-
any idea when this can be implemented (to use SACN in mode 3)?
-
can MA3 node now run in SACN node mode in MODE 3?
-
-
Mac actually dont support a touch screen natively. I install 'touch-base' driver and connect to a DELL monitor..
it works....but has lag.......honestly....it is far better and straight forward..using a window system connect to a touch mon.
-
I am using an iPad for webremote. But I find that adjusting Pan / Tilt using the finger to 'dial' the encoder is clumsy and sometimes end up in going to the INPUT VALUE window.
Any one have better suggestions ?
-
Same bug on Compact.....sometimes....not always....
-
Fresh download, extracted onto a different USB stick?
do need a differenet USB stick? i try 2 usb stick, but no luck.....basically the update is fine....can go to ma3 and mode 2 , but just the other screens (except 1,2,3) are displaying....waiting for update)
-
Ryan, yes.. i do
-
I do a factory reset. I have always been going thro these.... using the latest ma3 version for some shows. and then back to mode 2 (3.7.0.5) for some other shows..and has no problem.
but after this time, i have used 1.7. i cannot go back to update the console back to ma2 (3.7.0.5)
pls help.......quite urgent.
-
today i update ma3 to v1.7 and it is working fine..
then i try to reload it back to Version 0.92.1.5 (Mode2: 3.7.0.5)
except the screen 1,2,3 are working...all the other screens asking for user intervention.. and i cannot get my MA3 hardware back to running Version 0.92.1.5 (Mode2: 3.7.0.5).
any one can help?
-
I want to have a matricks pool object with the matricks all RESET. How to do it?
-
-
Same here
And SOLO assign to button is not working
-
Hi,
in preparation for MVR to import to MA3,
what are the data field equivalent in VW for Fixture ID?
-
I mean the new Ma3 processing unit. Sorry for the confusion.
-
I have a static RGB led bar with 16 instances. any one can guide how to write the library or modify existing one?
ch1 - dimmer
ch2 - strobe
ch3 - R(instance 1)
ch4 - G(instance 1)
ch5 - B(instance 1)
.
.
.
.
ch48 - R(instance 16)
ch49- G(instance 16)
ch50 -B(instance 16)
-
I experience unstable network connection with NPU a few times..where NPU suddenly disconnect and then merely shutdown the console and NPU and restart one time is not a solution. have to keep. on repeating and invite station again.
anyone has any thoughts?