Posts by Bentoylight

Ok Ryan, it was just an example for a workaround. In real life, I usually call my 3d elements "Decor"

If your 3d elements are ie with a CID 3DElements 1 thru 25, just do :

Set 3DElements 1 thru 25 "Visible3d" "" to hide

Set 3DElements 1 thru 25 "Visible3d" "Yes" to show

Edit Preset; Off the fixtures; Update

Or

Select the fixtures, active attributes, store the preset, choose Remove

Or

Select the fixtures, choose Remove in the encoder bar, store or update the preset.

If you plan to play a lot with macros and names, you should avoid space in labels.

You can use underscore : my_label

Because sometimes, the use of quotation marks is not easy, specially if you need quotes within quotes.

Hi

Does anyone knows what the meaning of the S in the Lock column in folder list ?

And how can i change it with command line ?

Thanks

Hi.

You can use Output as a source. Then store look.

Active Release for color and set delay in the delay tab. Then store your cue.

As any other value.

Hi

If you do it your way :

fixture 1

color 1

fixture 2

color 2

just click on the GridPos bitton in the encoder bar and turn the wheel.

This will set 0 and 1 in the grid position.

Hello every one

Did anybody already build a 64 steps phasers ?

Or at least more than 3 or 4 steps ?

This could be a challenge.

There is no gma2 software on an onpc command wing 3 xt.

Hi

Have a look at the gma3 library folder.

Off User Thru can also be fine.

Hi

Select half of your group and use mirrot on x-axis.

Hi

I think you can't use recipe or individual times.

Just set a global fade time for the offcue.

At preset x.y

At transition 70

Store preset x.y step z

Thank you Ryan

Hi

I'm looking for the replacement of gma.sleep() function in gma2 lua engine in gma3

Thx

Hi

You could make a macro or a plugin which changes coordonates of multiple cameras with

Set Camera # PosX x PosY y PosZ z

Then recall these cameras

The more cameras you'll create, the more fluent your move will be.

You also can use underscore : Fade_Out

Hi

Use : Set Layout "dimmer fx 1"."dimmer fx 1 fade o*" bordercolor ff0000ff