BECOME PART OF THE COMMUNITY - Sign up
here
-
Hi All,
Does anyone have a fixture template for a TW1 that has the dimmer correctly so it works when MIB is active in the cue stack?
The template through the console effects the MIB from working properly, from what iv read it should be that DIM 2 should be Dimmer Mechanism?
Any help id be most grateful?
Cheers
Patch
-
Hi All,
Does anyone have a fixture template for a TW1 that has the dimmer correctly so it works when MIB is active in the cue stack?
The template through the console effects the MIB from working properly, from what iv read it should be that DIM 2 should be Dimmer Mechanism?
Any help id be most grateful?
Cheers
Patch
-
-
Hi there
Does anyone have a fixture profile for Robe DLX where you can rotate and control the spin of gobo 2?
All the ones iv tried you can’t do it?
-
Hello there,
Is there a way dot 2 can tell you how many cues you have recorded including . cues?
Patch
-
hello there,
does anyone have a fixture template for a robe pointe mode 1 that allows you to select both types of prisms?
the one on the fixture share and console only allows you to select 1?
Cheers
Patch
-
iv also tried changing the magic timing for execution and programming and it still makes no difference?
strange because being a macro you'd think you can tell it what you want and it
-
Oh okay so you have to have that time set for the macro to work?
-
Hi
Iv tried what you suggested but what ever I do it doesn't take my fade command so the lights just snap on and off?
-
how would I create one that's a grid check/pre heat?
say I want every fixture to turn on to full with a fee of 30 seconds?
-
Hi there,
Does anyone know of an easy way to build your own custom macros on dot 2?
-
Hi,
Is there anything in the pipeline for an update to the Dot2 software?
Or can we suggest things that we would like to be included maybe?
Patch
-
Hi Krzysio
Look really stupid now.
thank you much appreciated
Patch
-
Hello there
Does Anyone have a fixture profile for a Equinox Vortex (see attached manual)
Be extremely grateful if anyone can help
Cheers
Patch
-
Hi,
Is there anything in the pipeline for an update to the Dot2 software?
Or can we suggest things that we would like to be included maybe?
Patch
-
-
Just seen there is another ma2 software update..... Is there going to be a DOT2 software update???
-
Hi
Yeah colour seem to work fine to be honest when selecting colours, the only thing I did find is though if ya wanted a bold colour like a red or a blue for example you always got a slightly off colour? I don't know if thats bulb related on the fixture though?
I had all fixtures in extended mode and that's what the desk had them doing as-well
All polarity was correct on the dmx so that was all okay
Maybe it was I didn't have them running that quick to be honest, I have noticed though on some other fixtures that it does the same thing just cycling between the three colours and not using all of the colours.
however though ran it on some Mac 250 washes and it works fine? its really odd I don't know if its the the desk or a floor in the fixture can't seem to put my finger on it
Patch
-
Hi there,
Wonder if anyone can help me, the other day I was doing some testing with some Martin TW1's when I ran the Rainbow Colour Effect the TW1's literally just cycled between Cyan, Magenta and Yellow?
Is this a problem wit the Fixtures, Desk or the Effect itself?
Any advice would be great
Cheers
-
will there be any video tutorials teaching us how to record our own macros?