Posts by Krzysztof Korzeniowski
-
-
in MA2 or DOT2 (only windows)
-
Why doesn't ma3 node support dot2?
It's probably not too difficult to add a few lines of code - so that the device can work with the dot2 system as well as with ma2 and ma3.
A lot of people are still working on dot2 - because it's a very intuitive and simple table.
This would be a good option for people who would like to get dot2 node1K - which is no longer available for purchase.
-
Separate install
-
Patch fixture from library
Select fixture
Use export fixture option
exported fixture is unpacked (.xml) -
You can use the export fixture option in the patch tab (dot2 ma2) (use USB PENDRIVE)
.pxml is packet xml -
SetIP command display ip addres ipv4 & ipv6 (onpc)
dot2 & dot2 node(1K) works with ipv6 (dot net protocol)
art-net works only with 2.x.x.x or 10.x.x.x
ma3 node use ma3net protocol in ma3 mode, and ma2net protocol in ma2 mode or art-net or sacn. (dot net protocol is not implemented
- this node cant work same as dot2 node)
in my work i use router with dhcp (2.x.x.x) - onpc & node get correct ip from dhcp.
If u not use router - u need set correct ip on console & node to work with artnet
ex
console 2.0.0.2
node 2.0.0.3
You can use any artnet device to receive artnet data. I have a normal artnet gate, ma3 node and dot2 node and they all work without a problem. -
if it doesn't work right away - it will be necessary to change ip dot2 console to 2.x.x.x
https://help2.malighting.com/P…dot2/keyword_setip/en/1.9 -
1 Switch node to grandma2 mode
2 select Artnet mode
3 set node ip to 2.x.x.x
4 turn on artnet output in dot2 console (setup / network protocols) -
I try use OSC.
Why input & output values is differrent ?
send values 100-10 & 9-1Is it possible in the future for the OSC to send information in the / page / fader format?
The current format is useless - system send numeric format (Sequence no & fader or key value)
-
Hallo
Dieses Produkt funktioniert gut - genau wie jedes andere art-net DMX-Gateway.
Dot2 auf dem PC erlaubt nur das Senden von 1 Universum (kostenlos)
Das einzige Gerät, das in der Konfiguration angezeigt wird, ist dot2 node (1k) - wodurch 1024 Parameter freigeschaltet werden
Dieses Gerät ermöglicht das Senden an alle Universen (1-8) - die einzige Einschränkung ist die Anzahl der Parameter.
-
Yes - nodejs work on win11
-
Yes - U can output artnet data from MA3 onpc - (ma3 send artnet data if PATCH is empty)
If U want 1 universe for free - use dot2 onpc
-
-
I use midi device to cotrol MA software
OnPC 1.6.3.5 - max value of controlled grandmaster is now 99%
-
It's not a grandma3 - it works perfectly
-
In dot2 u have one universe unlocked (free)
MA2 do not send any universe for free. (u need buy some hardware - node with parameters or wing) -
It's hard to say anything. If the console has been shipped, something may have come loose. It is also possible that it is the fault of moisture and bad connection.
Ultimately, damage to the power supply or the lcd module itself
-
Connecting the computer with dot2 onpc with the dot2 console via lan, or connecting an external monitor to the console - will allow you to work.
I am afraid that a visit to the repair service will be necessary
-
I add 10 ma3 dimmer
why i see universal in fixture sheet ?
