What do you mean with a clean start? New install?
This problem is solething that is happening since some weeks. So multiple days but no new install. Thx for thinking with me!
No new install
U can run onpc from start menu
MA3 OnPC program
MA3 Terminal
and MA3 Clean Start
-
Just run in clean start mode and save, then run normally and see if the errors still occur
What may be intuitive for you is not necessarily intuitive for someone else, and vice versa. As I said, there are people happily using MA3 now on both small and large shows, and who have had zero issues with stability or "failing." I have heard from many people that they find MA3 quite intuitive. Does that mean the development team thinks the job is done and isn't working on additional improvements both in feature-set and workflow? Of course not! Does that invalidate your personal experience? Certainly not. But I definitely want to push back on this blanket statement of MA3 being unusable and unstable for everyone, because that is absolutely not the case.
When I wrote that working with MA3 is unintuitive, confusing and uncomfortable (software errors or even failures during work) I meant the OnPC version.
The console version is definitely more stable and comfortable - because you have many screens plus harware buttons.
Please try to work on the OnPC version with one screen and any midi controller.
And then say whether such operation is simple, intuitive and convenient.
For me, working on DOT2 is very convenient - because I have everything I need on one or even on screens - right at hand - without unnecessary switching of screens / views.
Hi! Grabt diesen alten Beitrag aus.
Herzliche Glückwünsche ! Gut erledigt.
Großen Respekt, dass du es geschafft hast, deinen eigenen Tisch zu erstellen.
Es verwendet auch ähnliche Lösungen (Arbeiten auf zwei Computern), was zusätzliche Sicherheit im Falle eines Ausfalls bietet (obwohl dies sehr selten vorkommt).
Sie können Dot2 auf zwei oder sogar drei Bildschirme erweitern – fügen Sie einfach einen erweiterten Bildschirm hinzu und dehnen Sie das Programm auf das Ganze aus.
Ich habe auch die dot2-Steuerungssoftware über die Web-Fernbedienung erstellt. Dank dessen habe ich Zugriff auf alle Optionen über das Web und habe Feedback für LED-Steuerungen und motorisierte Eulen (BCF2000) erhalten.
Ich habe gerade die Software für BCF mit neuen Funktionalitäten wie Geschwindigkeitssteuerung, Pan Tilt - Grandmaster oder Umschalten zwischen Seiten oder Flügeln aktualisiert.
Most use the MA3 console in MA2 mode. You could even see it at Eurovision. The MA3 software is confusing, unreadable, and fails very often. New goodies are sometimes not as important - as intuitiveness and stability. Even though I have MA3 - it still works on .2 because it is reliable. Shame you stopped this series
.2 products.
MA3 is great harware - but poor software.
have you tried clean start ?
I try build fixtures
I set shutter default value 63 for ipanel
U must test it
It depends on what mode you want to set these devices. And whether you have such a device to check if the fixture is correct
Display MoreHi Thierry,
what is the exact type of fixture you need?
Fixtures can easily created in https://fixturebuilder.gdtf-share.com/ now.
Datsheet for Ipanal 24x10_QC can be found here: https://www.contest-lighting.c…24x10QC_manuel-web-en.pdf
In 6-Channel mode its only RGBW, Dimmer and Strobe. Very easy to create a fixture.
Datasheet for IPSpot: https://www.contest-lighting.c…PSPOTQC_manuel-web-en.pdf
Best regardsSascha
dot2 not support GDTF file format
I try use converted fixture - but is not usable
my post
GTDF to XML - converted file cant use with dot2
Stellen Sie sicher, dass die Firewall keine Verbindungen auf der LAN-Verbindung blockiert.
Ich hoffe, Sie denken daran, die richtige Verbindungsschnittstelle auf dot2 onPC auszuwählen, wenn Sie von WLAN zu LAN wechseln
Save as grand ma3 - from GrandMA2 onPC
https://help2.malighting.com/P…_save_as_grandMA3/en/3.9/
Überprüfen Sie, ob die LAN-Verbindung korrekt ist, und überprüfen Sie die IP-Adresse auf dem Laptop und vergleichen Sie, ob sie sich im selben Adresspool befindet. Mir ist es mehrfach passiert, dass der Laptop nicht die richtige Adresse von DHCP bekommen hat und die Geräte sich in der Session nicht sehen konnten.
Überprüfen Sie auch Ihre Firewall-Einstellungen.
Hi
I built a fixture in GDTF format and then uploaded it to fixture share to convert to .xml (coverter 1.4)
It turns out that the .xml file is causing a graphics error in dot2
It also cannot be imported into MA Fixture buildier 1.9
It looks like the file is not dot2 compatible.
The dot2 and MA Fixture buildier need to be updated - to be compatible with MA2 fixtures
Yes - i test it .it's my mistake
need to remove all "var" in extra code
if (msg.note == 87) {//wing select
if (wing == 2) {
wing = 1;
faderValueMem[56] = 1;
fbuttons = [13, 12, 11, 10, 9, 8, 7, 6, 13, 12, 11, 10, 9, 8, 7, 6];
buttons = [213, 212, 211, 210, 209, 208, 207, 206, 113, 112, 111, 110, 109, 108, 107, 106, 807, 806, 805, 804, 803, 802, 801, 800, 707, 706, 705, 704, 703, 702, 701, 700, 607, 606, 605, 604, 603, 602, 601, 600, 507, 506, 505, 504, 503, 502, 501, 500, 407, 406, 405, 404, 403, 402, 401, 400, 307, 306, 305, 304, 303, 302, 301, 300];
output.send('noteon', { note: 87, velocity: 0, channel: 0 });
} else {
wing = 2;
fbuttons = [21, 20, 19, 18, 17, 16, 15, 14, 21, 20, 19, 18, 17, 16, 15, 14];
buttons = [221, 220, 219, 218, 217, 216, 215, 214, 121, 120, 119, 118, 117, 116, 115, 114, 815, 814, 813, 812, 811, 810, 809, 808, 715, 714, 713, 712, 711, 710, 709, 708, 615, 614, 613, 612, 611, 610, 609, 608, 515, 514, 513, 512, 511, 510, 509, 508, 415, 414, 413, 412, 411, 410, 409, 408, 315, 314, 313, 312, 311, 310, 309, 308];
output.send('noteon', { note: 87, velocity: 127, channel: 0 });
}
}I have a dot2 on win11 and it works fine but with a real LAN connection.
Check Firewall Settings ...
Try to reinstall freeestyler (preferably in older version 3.9.xx)
U need set correct dmx values for OPEN and CLosed
Try set encfrom and enc to for Shutter
Hi - unfortunately I can't cope with these parameters either. I try to see how it is done in other fixtures - Sometimes it's hard for me to find the right attribute.
Creating a fixture for your Stairville will be fairly simple (for 24ch mode)
You have 8 x RGB segments
Start fixture buiildier
Add color led
1 RED
2 GREEN
3 BLUE
add virtual dimmer
4 DIM
Remove corse (4) - stay empty
THIS IS ONE SEGMENT (module)
Now
Select module
click Instances
and add 7 instances and click add [+]
THATS ALL
It would be nice if someone from MALighting commented on this topic.
Everything looked correct - this is node but without parameters (2k or 4k)