Posts by derLichtmann.de

Disable "Show Title Bar"

I also have problems with relative phasers since 1.7.:

- I create a phaser with relative PAN values.

Absolute PAN & TILT values "removed

Relative TILT value "removed

- Store this phaser on an executor:

Fader = TEMP

Knob = TOGGLE

Priority = SUPER

Now I start the phaser, everything runs normally.

Now I select another POSITION preset. The fixtures go e.g. "up"

and continue to move.

- everything is normal.

But when I switch off the phaser, it continues to run.

The values are in the programmer.

This was not the case with the old version. The phaser

stopped, the fixtures remained on the last PRESET.

Is that how it should be?

Translated with http://www.DeepL.com/Translator (free version)

Gobo wheel 2 is a static wheel, isn't it?

At the moment? I have already asked this question in april 2020. Received no answer.

aggiebilly: maybe they want us to buy a second full-size?!

Change Faderwings with GMA3 Compact

here comes the sun. Thanks!

But then the option "ALL FOR SELECTED" makes no sense for me.

If I stored it with "ACTIVE FOR SELECTED" then I have to activate the attributes again. Thats clear, no active attributes in the programmer.

Even store "LOOK" doesn't work.

And on first sight only Dimmer Values are affected. Gobo, Pan, Tilt etc were stored (without activating them again).

Hi All,

do the STORE options work properly?

I created a simple open white picture and stored it on a executor.

From there i changed Gobo, Position etc.

Stored this to another Executor (with: STORE/ALL FOR SELECTED)

But on the second executor are no dimmer values stored.

Same with STORE/LOOK.

What did I miss?

I've made a show on a GMA3 Fullsize, put it on a GMA3 Compact and now I want to change

the faderwings. I can only do that in the Playback window, not for the "real" faders.

They always display 1-10 on the corresponding page.

How can I access wing 1/fader 11-15/16-30 and so on?

Where's the trick?

OOPPS, ich bin im DOT Forum......SRY

- Choose your fixtures you want to change

- hit "BLIND"

- make your changes

- hit "STORE" and an Executor Button

- clear the programmer

- hit "GO" of your new Executor

- wähle die zu ändernden Lampen aus

- drücke "BLIND"

- ändere die gewünschten Parameter

- drücke "STORE" und einen leeren Executor

- programmer leeren

- an der richtigen Stelle "GO" drücken

I think you have to do this with SET RECIPES. They'll work for all fixtures (with the fitting attribute).

Thanks guys, I'm in touch with the support.

@ Ryan: I can't choose anything, the displays went black and after a few seconds the surface is back.

Greetz

Sigi

I have the following problem: during programming the console ( Fullsize #1511000000-100879) reboots suddenly.

This has happened about 3-4 times since I started using the console (since january 2020).

Unsaved content is then of course gone. With my Compact there were no such problems.

Has it already happened to you?

Is there an easier way to do that? In MA2 just make a preset, lets say PT and store it. Then with: "assign>preset>please>default "

you got your default preset - also marked in the preset pool. Or am I wrong and confused...

If it goes into series production ... dear team i like the hoody from your merch store.

Size XL.

Unfortunately, the desk lights always somehow dazzle on any screen. So I installed an RGB LED bar.

Now everything is glare-free and you can also clearly see the fader position.

Apart from that it looks really cool now.