How do i remove a fixture from a cue?
Posts by Karemort
BECOME PART OF THE COMMUNITY - Sign up here
-
-
I always start the program as administrator.
But problem is solved now.
Had to go back one build in the windows update.
Something there that Dot2 doesn’t like. -
Tried reinstalling and that didn’t help.
-
Suddenly, supposedly after a windows update, the dot2 onpc software won’t start.
It opens a window with the heading and thats all.
Anyone have som tips? -
You guys that use 23” touch screens, do you have som fader wing in addition or just use the faders on the screen?
Think of changing my setup and ditch the two APC20 I have.
-
-
Make mor IP addresses but still cant get all the software work together.
Anyway, the bomac can’t handel two APC20 so I cannot use it.
-
Can you be more specific?
Lets talk about TCP/IP and UDP/IP.
Per IP address a software can open a ports. Each port can open only once per IP.
If you are now running multiple software products opening a Art-Net UDP port, this can cause problems.
You need to assign many IP addresses to you adapter, then you can bind each software to an IP. Then each software can open the required port on his own address.
You can bind bomac to a address using the project settings dialog by clicking on the second tab "local IP".Okay.
Not a expert on this but hers how it is, and I’m clearly doing it wrong.
My loopback adapter is running om 2.000.0001 and the ArtNet to DMX software I picking up.
And I also chose that IP I Bomac.
So do I make another loopback with a different IP? -
Bomac works until I start the Artnet to DMX Software.
-
I have now made two presets so now it works.
But with midi I am a little short on note, 128 is max with midi.
So I was playing with BOMAC, but cannot get it to work at the same time as the ArtNet to DMX software is running, since I use a ENTTEC usb-dmx on the Dot2 onPC
Anyone have had the same experience? -
How can I do a setup with two APC20 on Dot2 onpc.
Right now they send the same midi message to Bome for each fader and button. Is there a way to separate them in Bome? -
«works great even got the knob on apc20 to scroll through wing screens [Blocked Image: http://forum.ma-dot2.com/wcf/images/smilies/smile.png]«
How did you do that?