I encountered this issue:
- I set a Sequence 1 with one cue (dimmer at 100%).
- I set the OffCue to have type=Follow
When I do "Go+ Seq 1", the fixtures goes to 100% and immediately to 0% (A Flash)
The Timecode Setup
When I create a timecode with a single event with token= "Go+" (Without an OFF event).
And I play this timecode.
The fixtures go to 100% and stay.
It seems that the Follow OffCue is ignored.
The motivation to NOT have an Off event, is so that I could control the duration of the flash in a single place, the sequence.