Bounce effect

Don’t think it’s easily possible, submit a feature request for it and that may help speed up implementation

There is a way, but not very fast,

You need 4 CUE, i prefer do it with recipe because the i can change the aspect easily.

Example :
Group 1
Preset Dimmer.1 (FULL)
Preset Dimmer.2 (ZERO)

Name    :     Selection   :   Value  :  Fade From x :  Delay from x   : Delay To x 
Cue 1          Group 1          1.1        0.2              0               2
Cue 2          Group 1          1.2        0.2              0               2
Cue 3          Group 1          1.1        0.2              2               0
Cue 4          Group 1          1.2        0.2              2               0

All The cue with follow Trig Type.

Like this you can thank to the Recipe change the aspect.

Tip:
For the cue 2 and 4 where the dimmer go out, I usually put in trig type "TIME" because like this i have more control of how many fixture will stay ON.


I hope this will help you.

create a phaser with step 1: dim=0 thru 100, step 2: dim=100 thru 0, phase=0 and see what happens...

Could you save a dimmer @ full cue with a delay of say 0 thru 0.5 and then a follow cue with a delay of 0.5 thru 0? However this would only be a bump I believe. I could also be totally wrong.