Could someone explain how the relation is between the values shown in the colorpicker and the values in the encoderbar/fixturesheet/dmxoutput?
When using a generic RGB fixture in the programmer, i set the value for red to 100% in the colorpicker it shows red at 100% but also green at 23.3% and blue at 10.5% Fixturesheet shows red at 100% but green and blue at 0 same goes for the dmx output and encoder bar. When setting red and green at 100% by the encoders the colorpicker shows red at 66.8% green at 100% and blue at 31.6%. While the fixturesheet shows the correct values.
Running GMA3 Light software version 184.108.40.206