Issues after onPC software update

Brand new to MA 3 lighting as a whole...

We recently updated to the latest software version for our onPC. Now whenever we update cues it seems when we store the NEW updated cue, the old cue values are still active in the cue. Example: Old cue dimmer value for fixture 101 was 30% and the new cue dimmer value for the same fixture is not 85%. Regardless of the way we store the updated cue info (overwrite or merge) after we triple clear, the cue immediately begins dimming from 30% to 85% then repeats itself. The phaser indicates a dimmer phaser is active.

We currently have just ONE SEQUENCE and about 11-14 cues in that sequence.

As mentioned before we are brand new to MA Lighting so laymen's terms in how to correct this problem are GREATLY appreciated!

Blessings,

Mike

Quote from GGGss_be

Welcome to the forum.

Tracking values inside your sequence perhaps? And those values sneaked inside a phaser?
There are quite some nice tools, to help you identify what does what at this moment.
I would suggest you do some study work (it's not that hard and will help you a lot) https://help2.malighting.com/P…ndMA3/cue_tracking/en/1.8

input

Code

Off Loaded [please]

Now the fixture 101 should go to 0 and you can start investigating from where those values come.
(Or you could send in your showfile and let us have a look at it, but you won't learn doing so

THANK YOU! This morning I discovered the issue totally by accident. All the "phaser" issues we were having stopped as soon as I activated the button on the lower left side of screen 1 to SINGLE STEP.

Quote from Ryan Kanarek

This is just a band-aid, not fixing the underlying issue. SingleStep just means that you won't see the phasers running in your programmer, but they will still be there and still get stored into your presets and cues.

So, how do I fix the underlying issue?

Thank you for responding!!