HELLO!
help!
Can ENTTEC storm8 be used with grandMA3?
ENTTEC storm8
BECOME PART OF THE COMMUNITY - Sign up here
-
Of course you can - this is the standard artnet gateway.
If you have an MA3 device that will unlock the parameters - it will work.
-
help！
Artnet seems to be connected, but I can't control the lights.
Do you know the reason?
-
You are in setup mode !! ... now no Artnet values are sent, only discovery packets.
Art-Net Menu - grandMA3 User Manual - Help pages of MA Lighting International GmbH
-
You are in setup mode !! ... now no Artnet values are sent, only discovery packets.
This is not true. When Output and/or Input ar enabled, also the DMX packets are sent out/received.
-
Do you know the reason?
As Krzysztof Korzeniowski asked already: Which grandMA3 hardware do you have connected?
Or please post a screenshot of the system info window that is set to Details-View Mode (this is the standard view mode of this window).
-
Thank you for contacting us.
It's the device you're using.
-
You are in setup mode !! ... now no Artnet values are sent, only discovery packets.
As dherderich said
- Enabling setup mode allows Art-Net configuration data to be sent and received even when Enable Output and Enable Input is Off.
Two things that I noticed in my console and command wing:
1 change auto for broadcast mode, and
2 try updating to the last release of the software, what's the IP address in your Enntec?
I use Enode Elation and Netron nodes and work perfectly with the Artnet in the broadcast mode.
Not all the cases are the same, but this works for me.
-
sorry!
It worked when I changed the address from 10.001 to 11.001. It was my setting mistake.
Thanks for all the advice!
It was helpful!
-
Oliver
Moved the thread from forum Forum Rules to forum System and Network Devices.
