misunderstanding with the MIB

  • Hello,

    I have:
    Cue 1 fixture 1 at Full position 1 Fade 3 MIB OFF
    Cue 2 fixture 1 at 0 position 2 Fade 3 MIB OFF
    Cue 3 fixture 1 at full position 3 Fade 3 MIB Late

    When I go from cue 1 to cue 2 the console sets the dimmer to zero in 3 seconds but does not go to position 2.

    I tried on a GMA2 which goes to position 2 by turning off the dimmer in 3 seconds.

    Is this normal?

  • I replicated this and the same thing is happening with me.

    Tryed creating a part cue with dimmer only, separating the position and dim times. Tryed different mib modes.

    The recorded position is ignored on cue 2.

    Doesn't seem normal to me...

  • I believe this is handled differently in gma2 and gma3

    the prepositioning for cue 3 takes precedence over the "invisible" (dimmer@zero) position in cue 2.

    You could possibly workaround this by creating an empty cue 2.1 with folllow trigger.

  • Actually the Wholehog II had a very simplistic mark cue creation function that had no possibility to edit the contents and did’t respect subsequent changes. Certainly not better.

    You catch more flies with honey…

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!