Phaser BPM fade up

Set the seq masterspeed to 0 in the first cue.

In the second cue set a cmd to bring it up to 30 with a 20second fadetime.

Ie

FaderSpeed Seq xxxx 30 fade 20

That doesnt really work because faderM at 30 is not 30bpm you would have to figure out on what level faderM for that speedmaster is at 30bpm.

You can reset The speedmaster to 60bpm with speed1 keyword and I was hoping you cpuld use IT to control te value also but i doesnt work.

I just tried storing the same values in 2 consecutive cues, 1 with 0bpm and the next with 30bpm and the light just faded up to speed slowly.

In v1.7.2

Oh that did not work on previous version because you could not store only The speed change i think. Great If its working now

Quote from Clintos

I just tried storing the same values in 2 consecutive cues, 1 with 0bpm and the next with 30bpm and the light just faded up to speed slowly.

In v1.7.2

Yep this still does not work. The speed does not fade at all. it will fade the dimmers with time but not the speed. This is why you have to do speed variations between cues with Speedmasters.

You could do this by changing your chase speed to 60 bpm and then use div2 in speedmaster seq settings and then just say FaderM (executor where the speedmaster is) at 50 fade 20

example: FaderM 201 at 50 fade 20

if the fader is at page 1

EDIT: Seems that you cannot fade the speedmaster with time. So this does not work.

Also FaderSpeed does not fade

I literally programmed lights on in a circle at 1bpm in cue 1

Copied cue 1 at 2

Edited cue 2 and made speed 30bpm.

Fade time of 10

Lights slowly speed up over 10 seconds…

Dont know what to tell you

Quote from Rikurama

You could do this by changing your chase speed to 60 bpm and then use div2 in speedmaster seq settings and then just say FaderM (executor where the speedmaster is) at 50 fade 20

example: FaderM 201 at 50 fade 20

if the fader is at page 1

EDIT: Seems that you cannot fade the speedmaster with time. So this does not work.

Also FaderSpeed does not fade

Display More

You can fade the speed with time… it does work

Target the sequence not the executor. Playback is always at the sequence level in MA3

Quote from Clintos

I literally programmed lights on in a circle at 1bpm in cue 1

Copied cue 1 at 2

Edited cue 2 and made speed 30bpm.

Fade time of 10

Lights slowly speed up over 10 seconds…

Dont know what to tell you

Display More

Yes I see but try that with Dimmer chase.

You are correct, doesn't seem to work with dimmer, I would report this to your distributor.

In the meantime put "Faderspeed seq xx 0" in cue 1 cmd

and put "Faderspeed seq xx 12.5 fade 20" in cue 2 cmd

As we know that 240bpm is the 100% value of the Seq speed master it is easy to divide 30/240 to get the 12.5% value to set the speedmaster to for your desired 30bpm.