hey guys, I've got the following situation. i have 6 rows of fixtures. every row consists of fixture x01 to x10. first row of fixtures=101 to 110, last row of fixtures=601 to 610.
I positioned everything as desired in my grid. when I open MAtricks, choose x-axis and step thru the blocks it looks fine. when I choose z-axis and step thru the blocks it also works fine.
but here comes the problem:
when I select my group and create a dimmer phaser with phase x=0 to phase x=180 it looks as expected, it's a sine wave from left to right. BUT when I create a dimmer phaser with phase z=0 to phase z=180 all my fixtures go from closed to full at the same time. here are 2 screenshots of my group.
the grid looks correct, doesn't it?