Hi,
today and yesterday I tried to create a fixture for my SHEDS Moving head in GDTF. In real life the fixture is working, but in 3D of grandma3 1.6.3.7 I cannot see any light.
To exclude there is an error on grandma3 I tried out the gdtf fixture for a "Robe_Lighting@Robin_Pointe@04062021". This is working well in 3D.
Can anybody see something I did obviously wrong on my fixture?
Any help is appreciated. File is uploaded.
Check Shutter channel
Thanks.
I have added the Channel set "open" on default value 7 for the Shutter, but unfortunately I still can see no beam.
U add only default dmx value
but No Channel Sets Defined
U must add channel sets (for 3d - must know when is open - dmx walues and phisical 1)
I think u must correct Phisical from value to 0 (dimmer channel)
Ya, seems Dim is always 'on'...no control of Attribute....and the shutter setup.Rex@LEDSpot90W_GDTF@Release_Candidate_2.zip Try this copy, seems to work in v1.4. Shutter may need some adjustment, but I could control it, I also noticed no emitter setup, but am unsure about the construct and where/when needed and for exactly what purpose? 3D? Beam still appears without it.
Good luck!
Many thanks, finally I found it. I copied the Shutter and Dim row from my original gma2 fixture and exported it back to gdtf. Now everything is working fine and I can do the "finetuning" with Gobo positions, Prism in GDTF fixture builder.
BR
Sascha
Uploaded and shared: https://gdtf-share.com/?page=h…LEDSpot90W_GDTF&rev=21870
