• Hi - i try control ma3 use OSC


    i send 3 messages for test
    /Page1/Fader201,i,10
    /Page1/Key101,i,1
    /Page1/Key101,i,0


    Fader work ok (small value diferences in vs out)

    Key message work correct when i set key101 as TOGGLE, SWOP,FLASH or GO...

    But when i set key handle as TEMP - gma not react correctly
    its works as TOGGLE (not like flash or swop)


  • I am quite certain you will get a more predictable and expected result, if you do not send four press and release messages for the same key, at the exact same time (as indicated by the timestamps in system monitor).


    try a delay of e.g. 10ms between press and release (of the same key)

    try a delay of e.g. 34ms (one dmx frame) between press/release combos of functions like toggle, which are multi-state and needs time to switch ON, for the next toggle command to be interpreted as an OFF


    key101 i 1

    [Wait 10ms]

    key101 i 0

    [Wait 24ms more to allow state change]

    key101 i 1

    [Wait 10ms]

    key101 i 0