temp fader with delay preset

    Hello

    i made a preset with a delay time 1 thtu 6 store it as a cue in a fader with temp fader.

    when i move the fader up and down it is not runninig as exepted .

    the fixture dont react as the temp fader moves [ slower/ with out fade\]


    Any sugastion?

    Thank you

    Quote from moar

    when i move the fader up and down it is not runninig as exepted .

    the fixture dont react as the temp fader moves [ slower/ with out fade\]

    I just did a quick test with 10 dimmers and it seems to work. Typing it out to be clear what I did:


    Fixture 1 Thru 10 at full

    Delay 0 thru 2

    Store Preset 1.1

    Clearall

    SelFix Preset 1.1 At Preset 1.1

    Store Seq 1 Cue 1

    Assign Seq 1 At Page 1.201

    Set Page 1.201 Property "Fader" "Temp"


    Now when I bring the fader up from 0 to 100% the lights snap on one at a time from Fixture 1 to 10. This seems correct.


    It's probably important to note that with this the fixtures will not fade, since they do not have a Fade Time. Simply adding a 2 Second Fade time to all of the fixtures makes then do the same but with a fade while bringing up the fader.