Setup for MIDI Input device

Hello Forum,

i connected an Korg nanoKontrol2 to my PC.

Then i opended Grandma3onPC 1.5.2.1

In Menu->Settings->onPC Settings the device is selected

In Menu->In&Out the Midi Channel, Index .. is configured. But nothing happens.

"B0 40 7F" is sent by the nanoKontrol2.

B0 = ControlChange MidiChannel 1

40 = Midi Index 64

7F = 127

But nothing happens when i press this button on the GrandMa3.

No wing or node is connected. Is this the problem?

Hello dherderich,

there are no messages on the system monitor window when midi messages come in.

Hallo Forum,

after the update to 1.5.2.3 it works!

Thanks dherderich for the help.