I work with V 22.214.171.124 and with one of my fixtures, which I took from the existing MA2 library, I have problems displaying the beam in 3D or creating phasers:
- The beam is not displayed in 3D. I built the device here and in reality I have a beam. Only the representation is wrong. The Fixture is: ADJ Focus Spot TWO.
- Unfortunately, when I create a phaser, the position is different in reality than in 3D. The device moves the tilt movement to the left and not forwards, as set. Which parameters are decisive for the correct position of the crosshairs in the Phaser menu?
Thank you in advance!