When having a tempfader with an intensitycue in it (nothing else stored) the lights don't smoothly fade out when lowering the fader quickly. They stop at 25% remaining there for whatever fadetime is assigned to the offcue before snapping out.
Very annoying bug which makes 1.5 unusable for me. 
Thank you for reporting this one, we have it now at our list.
Am I right, that it didn't got fixed with 1.5.2.3? 
I experience a similar issue with Offtime cues with recipes in.
The recipe fade time is not respected in Offtime cues, recipe attributes just snap off, only the cue fade is respected.
Hey guys,
just catching up on my answer on Facebook 
You are absolutely right, this bug is quite annoying. But unfortunately due to some unintended side effects it did not make it to the bugfix. So it requires a bit more work. Be sure, we are working on it.
I can see now this issue comes about because the sequence has an Off Cue Time... Is there any reason (of course it should work regardless) why a temp sequence would need an Off time?
I can see now this issue comes about because the sequence has an Off Cue Time... Is there any reason (of course it should work regardless) why a temp sequence would need an Off time?
I'd turn it around. Isn't the whole point of using temps (compared to flash) that timings are considered?
I use temp-button and faders all over the place but mainly for my main-per-fixturetype-dimmer-fader, because I want to "flash" it with an offtime which looks way more organically in my opinion...and you can't have a temp-button without a temp-fader in that scenario...
Yep, totally makes sense that use case.
As a work around for now then I would have to suggest duplicating your temp sequence (not mirror) and placing one on a Temp fader with zero off time, and another on a Temp button with the Off Time.
You can definitely have a Temp button only and I've tested this (flash with fade off) and it works.
Don’t have an account yet? Register yourself now and be a part of our community!
