Since I had no luck in the fixture share I'll try my luck here.
So I would like to use the "LED TMH-X Bar 5 Moving-Head Beam" (official name)
However, when I search for its name in dot2 a "LED TMH-X" and a "LED TMH-X5" search result appear but both are not the correct fixture; they are wash moving heads instead of bars.
When I google "LED TMH-X" I get both the wash and not the moving bar I'm using. Erugh, confusing..
This is the manual:
So I read this thread because I tough "let's make it myself".
I'm a bit new to fixture creation so I don't know exactly what is meant with the following.
"the Fixture Builder can only create Fixture Types with one Instance"
The fixture consists of 5 individually addressable RGB leds.
Would it not be possible to create this in the fixture builder?
TLDR: multi-instance fixture workaround since the Eurolite TMH-X is not supported as a / one fixture.
After reading some more it can be quite complicated to have this fixture show up in dot2 as one fixture.
So I came up with a workaround. What If I add in dot2 a fixture with 11 channels pure for movement, dimmer, strobe etc. Then I add another 5x "Generic LED-RGBW" fixture. Would this work?
One moving led bar would show in my dot2 interface as 6 'fixtures': One just to control the movement, dimmer channel etc. The other 5 to individuals control the color of the individual LEDs. In total, those 6 fixtures would make up the 32 channels this fixture is made off.
Question: I found a generic RGBW 'fixture'- now I just need one for the first 11 channels to control pan, tilt, strobe, etc. Any tips to point me in the right direction?
Hopefully, someone can help me out!