Just curious if anyone else is experiencing this:
Created a 4 Cue Sequence for manually bumping intensities.
Each cue has a .1s fade time, Trigger Type = Go
Handle assignment = Temp (Exec 101)
Wrap Around = Enabled
Restart Mode = Next Cue
When the OffCue Fade Time = 0s, the Sequence advances with each button press and wraps around back to cue 1 without issue.
However, when OffCue Fade Time = .1s, the Sequence advances until Cue 4 and does not wrap around.
I was getting around this by using "load next sequence "Label" in the OffCue CMD line, but that trick seems to no longer work in 126.96.36.199.