Restart Mode: Next Cue | No wrap around when OffCue has fade time

Just curious if anyone else is experiencing this:

Created a 4 Cue Sequence for manually bumping intensities.

Each cue has a .1s fade time, Trigger Type = Go

Handle assignment = Temp (Exec 101)

Wrap Around = Enabled

Restart Mode = Next Cue

When the OffCue Fade Time = 0s, the Sequence advances with each button press and wraps around back to cue 1 without issue.

However, when OffCue Fade Time = .1s, the Sequence advances until Cue 4 and does not wrap around.

I was getting around this by using "load next sequence "Label" in the OffCue CMD line, but that trick seems to no longer work in 1.3.1.3.

Thoughts?

Just found another issue related to having OffCue Fade times:

Created a 6 Cue Sequence.

Each cue has a .5s fade time, Trigger Type = Go

Handle assignment = Go+ or Toggle (Exec 102)

Restart Mode = Current Cue

When the OffCue Fade time = 0s, the Sequence will restart in the current cue as expected.

However, when OffCue Fade time = .5s, the Sequence will restart at cue 5 always...regardless of which cue the sequence was turned off in, oddly.