Problems updating onPC 2Port Node 2k

  • Hi!


    Just got a brand new gma3 onPC 2Port Node 2k out of a box. It has version 1.1.3.2 in it and I am trying to update to 1.1.4.2 following these orders: https://help2.malighting.com/P…dMA3/update_xports/en/1.1


    However when I turn on the node with the usb, it the screen just goes full white, not prompting anything about the update. On a smaller flashdrive of 1 GB it boots normally after a while, on larger (32GB) it just stays full white.


    So far I've tried with different drives and formatting them again (FAT32 as it is told) and copying the files and 2 directories both from mac OS and PC but with no success.


    Does this sound familiar? Is there any other way to update the software?


    Thanks.

    Toni

  • Well that explains the problem with 32GB sticks. What about the 1GB?


    I forgot to mention, on the 1GB it boots to 1.1.3.2 after a while, so it does not start the update process..

  • To confirm, on your USB stick, you should have:

    • A folder called "EFI" (with some stuff inside it)
    • A folder called "ma" (with some stuff inside it)
    • An .scr file called "update"

    All three of these should be in the root of your USB stick, not inside any other folders.