How Dmx input send to programer?

    • Patch some fixtures on the receiving dmx channels.
    • From the fixture window select the DMX tab at the bottom right
    • Select the fixtures you want to capture and press Please Please
    • or
    • On <Fixture selection> for example On Fixture 1 Thru 10
  • Code
    Unfortunately it does not work. I tried to activate the parameters your way. the parameters activate but do not accept the value from the DMX input. In MA2, you can direct the DMX input signal directly to the programmer using the DMX Remotes menu in MA3 in the target tab does not have such a function.