HELLO ALL
Which models of external monitors are recommended for dot 2. 
EXTERNAL MONITOR
BECOME PART OF THE COMMUNITY - Sign up here
-
-
Information on external monitors is located in the tech bulletin here:
http://www.lightpower-files.de/Assets/Technical bulletin_external touch screen for dot2_D2.pdfI think just about any touch screen monitor will do. I'm using a off brand and it works fine with my setup. It's a full HD (1920 x 1080) DVI-D which I believe is what the dot2 is set for. Just make sure that your monitor is connected, when you boot your dot2.
-
H
It does not work with ELO touch screen model ET1523L
wherefore? -
MA Lighting always recommends ELO touch screens, as ELO seems to have become a standard for touch screens.
According to ACT Lighting: "Currently, we only advise the use of this touch monitor, as it's the only one we've tested so far: ELO 2200L Intellitouch technology -- Part# E432721"
But I would think the ET1523L will work as well.
http://app.teamsupport.com/wik…id=493740&ArticleID=40986 -
Elo has different touch technologies for the same range of types. Please make sure it is iTouch (Intellitouch).
-
ELO touch screen model ET1523L - 100% does not work from the dot2 (((
-
Thank you all for your reply.
-
I'm using a Dell touch screen. Works great. Lightweight, and has DVI, and HDMI inputs. Great when you need to see a video signal at the console.
Dell Model S2240T -
the same
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!