
Assign Rotary knob.
-
-
in the current version, this is not so easy to do.
The graphical user interface of v1.0.0.3 only supports predefined keywords like Go+,Go- etc to be assigned to the Encoderfunctions of the specialexecutors
-
Understand ! Thanks so much , Andreas !
-
Hi Steven,
That's a nice idea.
Like Andreas mentioned, it's not easy to do at the moment.
If you think you need it to speed up your programming, you can try the following:
Create an empty Sequence far away from your current Sequences (for example Sequence 1001) with two cues.
In the CMD section of the first cue, type:
Next Step; Off Sequence 1001
In the CMD section of the second cue, type:
Previous Step; Off Sequence 1001
Then in the commandline, type:
Assign Sequence 1001 At SpecialExec 6
This will assign the Sequence at the right Rotary Knob.
Then type these to assign GoFastForward & GoFastBack:
Edit SpecialExec 6 Property "EncoderRight"
In the pop-up, choose >>>
Edit SpecialExec 6 Property "EncoderLeft"
In the pop-up, choose <<<
You can then use the same Rotary Knob to create/browse through the Steps.
Hope that's helpful.
-
Luke, you are very smart! Thank so much for your help!!
-
Rotary Knob select Cue Function
Command for previous Step:
Load -1
Command for next Step:
Load +1
Space between Load and - or + is important.
This works only with the console or the onPC Command Wing.
It does not work without hardware !
Description:
1. You need to store some cue´s in a cuelist on an executor.
2. Press Assign and then Press the Executor Button.
3. Write/ Load -1 /in the EncoderLeftCmd Window and Press Enter or Please.
4. Write/ Load +1 /in the EncoderRightCmd Window and Press Enter or Please.
5. Assign the Encoder Key or the Fader Key as an Go+.
Now you can rotate the Rotary Encoder and Chose the cue you want.
Press the Go+ Button to load the cue.
Thats all ; )
I use it for busking.
I hope it works for your needs.
-
Rotary Knob select Cue Function
Command for previous Step:
Load -1
Command for next Step:
Load +1
[...]
This works only on the console and not on the ONPC !
Load Previous and Load Next the intendend commands for this action, but yours work also.
Why does it only work on consoles in your opinion?
-
I donˋt know.
I got this information from MA techsupport some weeks ago.
I tested it but it only works on my GMA3-light and not on the onPc.
Maybe it works on the onPc next version.
-
It works on the onPc but only in combination with an Command Wing