BECOME PART OF THE COMMUNITY - Sign up here
  • Hello my dear fellow colleagues,

    Had a problem right there.

    I put my old TV (48 “Tft) behind the console as a 3D visualizer. It has full HD and, as usual, HDMI inputs.

    DSP-> HDMI cable fetched and off you go.

    I thought?

    There is no Signal and either a sign of sync in both modes 2 or 3.

    Now the UM says:

    "The grandMA3 series supports only native display port connectors on external screens"

    I googled everything, asked my Videorockets, but what does "native dpc" mean? ?

    Or are there roher causes, or rather a solution.

    Maybe I'm just too stupid but with all computers MAC & PC works.

    And Yes the Cables are no cheap ware.

    Thanx?

    Hallo liebe Kollegen,

    Hätte direkt da mal ein Problem.

    Ich habe meine alte Klotze (48“ Tft) als 3D-Visualisierer hinter die Konsole gestellt. Der hat Full-HD und wie üblich HDMI Eingänge.

    DSP->HDMI Kabel geholt und los sollte der Ritt gehen.

    Dachte ich?

    Weder im 2er noch im 3er Mode gibt es ein Signal oder gar irgend ein anzeichen von Sync.

    Jetzt steht im UM:

    „The grandMA3 series supports only native display port connectors on external screens“

    Habe alles gegoogelt, Videoraketen gefragt aber was ist mit „native dpc“ gemeint??

    Oder gibt es da andere Ursachen oder besser gesagt eine Lösung.

    Vielleicht bin ich zu dumm aber mit allen Computern (MAC&PC) läufts.
    Ja und es sind keine Hama Kabel.

    Thanx?

    Björn Friebe

    Wiesbaden

    LOOM
    Lichtdesign

    Web: http://www.LOOM.jetzt

    Mail: Hallo@LOOM.jetzt
    ____________________________________
    im Angebot grandMA3 light

    •Vermietung

    •mit Operator zu vergünstigten Konditionen

    •2er+3er Software Schulung

  • You need to use a screen that natively supports displayport. (that actually has a displayport (DP) connector inbuilt)

    Typically there are two different types of adapter cables from DP to HDMI, Passive and Active adapters:

    The passive adapter cables requires a Dualmode Displayport source.

    - the grandMA3 does not have a Dualmode Displayport output

    The active adapter cables requires power from the Displayport source

    - the grandMA3 does not supply power on the Displayport output

  • Ok cool, thank you well for the Infos.
    I didnt found anything about nativ dsp.
    I suspect this is not Standard and I guess you can buy MA-Screens soon with (2009) 1.2 native dsp. Input ;)


    1.2 is from 2009 now is 2.0 standard.


    Probably they assumes that all users who use the ports only for touch screens :thumbdown: X/

    Björn Friebe

    Wiesbaden

    LOOM
    Lichtdesign

    Web: http://www.LOOM.jetzt

    Mail: Hallo@LOOM.jetzt
    ____________________________________
    im Angebot grandMA3 light

    •Vermietung

    •mit Operator zu vergünstigten Konditionen

    •2er+3er Software Schulung

    Edited once, last by BF-) (December 26, 2019 at 11:16 PM).

  • I know the links. I also read them up and down. But it must be possible to connect a screen with HDMI, there are situations such as for presentation purposes or preprogramming, you need a large screen and they are usually equipped with HDMI.:/:S


    And to turn on a computer every time for Visualisation, even though the Console has two video ports should be redundant in my eyes.

    Björn Friebe

    Wiesbaden

    LOOM
    Lichtdesign

    Web: http://www.LOOM.jetzt

    Mail: Hallo@LOOM.jetzt
    ____________________________________
    im Angebot grandMA3 light

    •Vermietung

    •mit Operator zu vergünstigten Konditionen

    •2er+3er Software Schulung

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!