Recomandation for ColorSource Relay and Wireless DMX Transmitter.

BECOME PART OF THE COMMUNITY - Sign up here

    Hi emilem63,

    "dot2" compatible sounds good.

    But in fact, most wireless DMX systems work with a "normal" DMX input.

    This DMX Signal will be transmitted and a receiver at the other end will transform the wireless signal back into DMX.

    This should work console independent- as long as the console speaks a valid DMX and the wireless system understands a valid DMX.


    From our german MA distributor I know, that they distribute "Wireless Solution" products (https://wirelessdmx.com/) and

    quite some customers use dot2 together with it without any problems.

    In most moving lights with a wireless option, "wireless solutions" or "lumen radio" products are used.

    I think with these two brands, you´ll be fine.


    Cheers