Wishlist for future Versions

That's great Qincy! How did I miss Pressing the View key then the Go key. DUH!
I should know better than to ask questions when I had a LATE night!

Thank you for the quick reply.

Well more speedfader
possibility to use Master section for Speed fader
mouse enable on internal screens
ma wings 2 Selektion macro (i know the workaround but naaah)
possibility to turn off executer timings like Master Rate and speed (very important to me)
Overwrite programmer with next/new Cue like gma

I have to say this console is amazing. Doing all my shows on it, just bought one for the theater where I work. The new firmware version is great! Thanks for your work!
About the wanted improvement:
This:

Quote from loeffelandi

Well more speedfader
possibility to use Master section for Speed fader
mouse enable on internal screens
ma wings 2 Selektion macro (i know the workaround but naaah)
possibility to turn off executer timings like Master Rate and speed (very important to me)
Overwrite programmer with next/new Cue like gma

Display More

And:
- RDM support
- For the Cue lists, a "jump" function which allows the cue, once executed to jump to the cue N°of our choice
- For the Master Cue , the possiblity to put a chaser as a cue

Hi @Yaneck,

two of your three wishes are already possible! To jump to Cue N you can use the Goto function. For example: You are in Cue 10 of the main sequence and you want to jump to Cue 25 directly. The command for this is "Goto Cue 25 Please". If you want to do this on a different executor then the Main Sequence you have to expand the command with the location e.g. "Goto Cue 25 Exec 1.6 Please".

To run a chaser as a cue, you can store an empty cue into your cuelist and use the CMD column to start the chaser, which is located on a different executor. For example you've programmed your chaser on executorbutton 1.106. Then the command should be "Go Exec 1.106" to start the chaser. If you want to stop it later in your cuelist, you have to use the command "Off Exec 1.106".

Cheers,
Lars

Thanks for your answer. I already knew the workarounds. But yeah I'll have to stop asking things that are already doable What I really meant was those features without the command function. But that just me not wanting to type easy code

i think playback priority including above programmer would be very nice

- possibility to make a speedfader out of the executor faders

Quote from Sebik

- possibility to make a speedfader out of the executor faders

Try store speed Exec x.y

Quote from loeffelandi

Try store speed Exec x.y

Shure that works? I have no console to try at the moment

Hi Sebik and loeffelandi,

yupp that works.
Press "store" "Speed" followed by a Button press on one of the two Buttons below an executorfader.
You can choose then, between the Master Speed or Master Fade.
Alternatively you can use "store" "Time" followed by a Button press on one of the two Buttons below an executorfader.
You can choose then, between the Exec time and the Programmer time.
- but -and that´s the Point of most discussions -this doesn´t work for the two 100mm (Master)Faders.

Cheers,
Qincy

Quote from Michael

Hi Sebik and loeffelandi,

yupp that works.
Press "store" "Speed" followed by a Button press on one of the two Buttons below an executorfader.
You can choose then, between the Master Speed or Master Fade.
Alternatively you can use "store" "Time" followed by a Button press on one of the two Buttons below an executorfader.
You can choose then, between the Exec time and the Programmer time.
- but -and that´s the Point of most discussions -this doesn´t work for the two 100mm (Master)Faders.

Cheers,
Qincy

Display More

Thanks Qincy

Can i make 2 speedfaders this way and use one for pan tilt speed and one for dimmer speed?

The console only supports 1 Speed Master.

I hope this will change quick

Off master Speed for Exec . Keep spead button Pressedienst tap Tempo on Go Button of The corresponding exec. Otherwise Define learn Button in Exec

Quote from loeffelandi

Off master Speed for Exec . Keep spead button Pressedienst tap Tempo on Go Button of The corresponding exec. Otherwise Define learn Button in Exec

All 3 requests are actually included in the software.

1. Speed and Rate Master can be disabled for every executor > see Picture
2. Press and hold the Learn key in the command section and press any of the executor buttons to get a temporary Learn button.
3. Any executor button can be set to be a Learn key > see Picture

I use it all the time Go-Button. And what makes it better is Having Exec Time and Prog Time each on a slider! Its very valuable to us as the unexpected usually happens!

Quote from Go-Button

All 3 requests are actually included in the software.

1. Speed and Rate Master can be disabled for every executor > see Picture
2. Press and hold the Learn key in the command section and press any of the executor buttons to get a temporary Learn button.
3. Any executor button can be set to be a Learn key > see Picture

I know i forgot to qoute The corresponding post Tried to explain it to somebody

A feature that i would find useful is to have the dimmer percentage on the rectangles representing the fixtures in those 5 "grid-scenes" we can create by ourselves. Actually it's just fading from black to white or vice-versa, but it would be nice to add that little bit of info (particularly useful for theatrical application).

And another thing, It would be nice for generic dimmer to be able to give the a color according to the lee and rosco catalog so we could even more easily find out which rectangle is which fixture.

Thanks!

Artnet in is not available
midi cc is not available only midi note
analoog in does not work as a fader.

horizontal scrollencoder with unused Encoder

Import effect from gma2.same as the fixtures

sound to level effect