Hello all. I have been trying over and over to create a slow rise with my LEDs. My problem is when I start the rise from 0 to whatever intensity they seem to abruptly "pop" on then do the rise. I have tried to preset them in the cue before at 1 but you can see them. I even tried below 1 at .5 and so on but still "pop" on. I was wondering if there was a setting to take them from off to slow rise without "popping" on so that it's not noticeable.
How can I create a slow rise with LEDs without the abrupt "pop" on
BECOME PART OF THE COMMUNITY - Sign up here
-
Hey,
I guess what you are looking for is the fadetime, right?
The dot2 is able to handle fadetimes per cue and per presettype. Please take a look at the links below, both are explaining more about the fadetimes:
http://help2.malighting.com/Pa…n/1.3#toc_header_anchor_4
http://help2.malighting.com/Pa…n/1.3#toc_header_anchor_2
Cheers,
Lars -
The problem with LED fixtures is that it's very difficult to dim them with very low values. Only some expensive fixture can be dimmed at a very little value. Most of them start with an important brightness
-
Are the leds only RGB in 3 channel mode? Make a virtuell Dimmer. Put the color you want on 100% and fade in the virtuell dimmer...