More than 2 Prisms

As far as I know...to visualize split beams/PRISMA1 feature, you need an EFFECTWHEEL that references the 'images' of the split beams; much like a GOBO1 feature. This is how I know the MA system to function.

Currently, it seems, the Fixture Builder[v1.3.2.2] does not have an effect wheel 'Wizard'. There is the GOBO1 and COLOR1 constructors but no 'PRISMA1' wheel wizard.

You could hack this in if your profile is already setup to display 2 beams via an effect wheel.

Change the current slot image to be the 4-beam image file.
Change the physadditional= assignment to 4 instead of 2, may need to adjust the 'spread' in physfrom and physto assignments.

Of course, you'll have to do this in an outside .XML editor since the FixtureBuilder doesn't accommodate this.

Good luck!

Dear @Marekvac,

if you still struggle with the Fixture Type you can also contact your local MA distributor.
The support department is happy to assist you!

You can find the list of distributors here: http://www.malighting.com/en/company/ma-worldwide.html

Cheers,
Lars