Hello Im looking for a working fixture for my ADJ Quad Phase HP.
I already downloaded the fixture from MA Fixture Share, but this one doesnt work, its only displaying one color.
Can someone help me?
Fixture ADJ Quad Phase HP
BECOME PART OF THE COMMUNITY - Sign up here
-
-
Can you please let us know which fixture type you've downloaded?
Is the problem in 3D or with the real fixture?
Do you have a DMX chart which you can forward?Cheers,
Lars -
If you want this fixture to visualize the preset colors in the DMX chart; you'll need to use the COLOR1 or SCROLLERSELECT sub attribute and build a wheel for it. The control channels may in fact drive the unit on the stage, but to visualize 'colors' on a beam or LED surface in MA3D you'll need to use one of the correct sub attributes that control color visualization. The 4 sub attributes that control color visualization are: COLOR1,COLOR2,COLOR3,SCROLLERSELECT.
Good luck!
Rex
PS: and you won't get the 3 parabolic mirrors splitting the single LED source into multiple beams visualizing, you'll get a single beam that changes color.
-
Can you please let us know which fixture type you've downloaded?
Is the problem in 3D or with the real fixture?
Do you have a DMX chart which you can forward?Cheers,
LarsHi Lars,
I've downloaded the fixture from this page:
https://fixtureshare.malightin…20Phase%20HP&mode=00&rev=
Then I recognized that this fixture doesnt have any DMX channels.
My problem is in the real fixture not in 3D. I attached the DMX chart to this post. I hope someone can help. I'm looking forward to your answers. -
Hey!
I've donwloaded the same file and imported it into my dot2 onPC v1.3 without any difficulties.
Please make sure that you use the right version. It must be min. v1.3!To get control about the Color you should use the RAW Dialogs!
Enclosed you will find the Fixture Type which I've used.
Cheers,
Lars